Query String: bisperoxovanadium bpV
- ChEMBL_1911577 (CHEMBL4414023) Inhibition of human 6His-tagged SHP2 (1 to 525 residues) expressed in Escherichia coli BL21 Star (DE3) using DiFMUP as surrogate substrate as preincubated for 30 to 60 mins followed by substrate addition and measured after 30 mins bpV-based fluorescence assay
- Inhibition Assay The inhibition of SHP2 by compounds of the invention (concentrations varying from 0.003-100 μM) was monitored using an assay in which 0.5 nM of SHP2 was incubated with of 0.5 μM of peptide IRS 1_pY1172(dPEG8)pY1222 (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide) (SEQ ID NO:1 and SEQ ID NO: 2, respectively, in order of appearance). After 30-60 minutes incubation at 25° C., the surrogate substrate DiFMUP (Invitrogen, cat #D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then quenched by the addition of 5 μl of a 160 μM solution of bpV(Phen) (Enzo Life Sciences cat #ALX-270-204). The fluorescence signal was monitored using a microplate reader (Envision, Perki-Elmer) using excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitor dose response curves were analyzed using normalized IC50 regression curve fitting with control based normalization.
- SHP2 Phosphatase Assay IC50 values were determined at room temperature in 384-well black polystyrene plate, using a final reaction volume of 15 μl and the following assay buffer conditions: 60 mM Hepes (pH=7.2), 75 mM NaCl, 75 mM KCl, and 1 mM EDTA, 0.05% P-20, 5 mM dithiothreitol (DTT). Full length SHP2 enzyme (diluted to 0.1 nM in reaction buffer) were co-incubated with 1 uM IRS-1 peptide and 0.01 nM to 10 μM compounds of the disclosure for 60 min. The surrogate substrate DiFMUP (5 μL, 100 LIM) was added, and incubated at rt for 60 min. The reaction was then quenched by the addition of 5 μL of a 40 μM solution of bpV(Phen). The fluorescence signal was monitored using a microplate reader (Envision, Perkin-Elmer) using excitation and emission wavelengths of 360 nm and 450 nm, respectively. The inhibitor dose-response curves were analyzed using normalized IC50 regression curve fitting with control-based normalization.
- SHP2 Allosteric Inhibition Assay More specifically, the phosphatase reactions were performed at room temperature in 384-well black polystyrene plate, flat bottom, low flange, non-binding surface (Corning, Cat #3575) using a final reaction volume of 25 μL and the following assay buffer conditions: 60 mM HEPES, pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA, 0.05% P-20, 5 mM DTT.The inhibition of SHP2 (concentrations varying from 0.003-100 μM) was monitored using an assay in which 0.5 nM of SHP2 was incubated with of 0.5 μM of peptide IRS1_pY1172(dPEG8)pY1222 (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide (SEQ ID NO: 1)). After 30-60 minutes incubation at 25° C., the surrogate substrate DiFMUP (Invitrogen, cat #D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then quenched by the addition of 5 μL of a 160 μM solution of bpV(Phen) (Enzo Life Sciences cat #ALX-270-204). The fluorescence signal was monitored using a microplate reader (Envision, Perki-Elmer) using excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitor dose response curves were analyzed using normalized IC50 regression curve fitting with control based normalization.
- SHP2 Allosteric Inhibition Assay More specifically, the phosphatase reactions were performed at room temperature in 384-well black polystyrene plate, flat bottom, low flange, non-binding surface (Corning, Cat #3575) using a final reaction volume of 25 μL and the following assay buffer conditions: 60 mM HEPES, pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA, 0.05% P-20, 5 mM DTT.The inhibition of SHP2 by compounds of the invention (concentrations varying from 0.003-100 μM) was monitored using an assay in which 0.5 nM of SHP2 was incubated with of 0.5 μM of peptide IRS1_pY1172(dPEG8)pY1222 (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide) (SEQ ID NO:1). After 30-60 minutes incubation at 25° C., the surrogate substrate DiFMUP (Invitrogen, cat #D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then quenched by the addition of 5 μl of a 160 μM solution of bpV(Phen) (Enzo Life Sciences cat #ALX-270-204). The fluorescence signal was monitored using a microplate reader (Envision, Perki-Elmer) using excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitor dose response curves were analyzed using normalized IC50 regression curve fitting with control based normalization.
- SHP2 Allosteric Inhibition Assay More specifically, the phosphatase reactions were performed at room temperature in 384-well black polystyrene plate, flat bottom, low flange, non-binding surface (Corning, Cat#3575) using a final reaction volume of 25 μL and the following assay buffer conditions: 60 mM HEPES, pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA, 0.05% P-20, 5 mM DTT. The inhibition of SHP2 by compounds of the invention (concentrations varying from 0.003-100 μM) was monitored using an assay in which 0.5 nM of SHP2 was incubated with of 0.5 μM of peptide IRS1_pY1172(dPEG8)pY1222 (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide) (SEQ ID NO:1). After 30-60 minutes incubation at 25° C., the surrogate substrate DiFMUP (Invitrogen, cat# D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then quenched by the addition of 5 μl of a 160 μM solution of bpV(Phen) (Enzo Life Sciences cat# ALX-270-204). The fluorescence signal was monitored using a microplate reader (Envision, Perki-Elmer) using excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitor dose response curves were analyzed using normalized IC50 regression curve fitting with control based normalization.
- SHP2 Allosteric Inhibition Assay The phosphatase reaction was conducted in 384-well black polystyrene plates (Corning, Cat #3575) with flat bottom, low edge and non-binding surface at room temperature and 25 μl final volume of the following buffer condition: 60 mM HEPES, pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA, 0.05% P-20, 5 mM DTT.The following experiments were conducted to monitor the SHP2 inhibition by the compounds (at concentrations of 0.0003-100 μM) in this invention:Wherein, incubate 0.5 nM SHP2 with 0.5 μM peptide IRS1_pY1172 (dPEG8) pY1222 (sequence: H2N-LN (pY) IDLDLV (dPEG8) LST (pY) ASINFQK-amide) (SEQ ID NO: 1) (WO2016/203406A1). After incubation at 25° C. for 30-60 minutes, the alternative substrate DiFMUP (Invitrogen, cat #D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then carefully diluted by adding 5 μL of a 160 μM bpV (Phen) solution (Enzo Life Sciences cat #ALX-270-204). The fluorescence signal was monitored using a microplate reader (VARIOSKAN LUX, Thermo) with excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitory dose-response curve is analyzed using a standardized IC50 regression curve based on control-based normalization.
- SHP2 Inhibition Enzymatic Assay Assay volume of 20 μL/well was assembled in 384 well black polystyrene low-binding microplates (Greiner), using the following buffer: 60 mM HEPES pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA pH 8, 0.05% tween-20, 5 mM DTT. The SHP-2 enzyme (synthetized by Origene, Met1-Leu525, cat #TP750155) was used at a final concentration of 0.5 nM. The enzyme was activated by 500 nM IRS1 peptide (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide SEQ ID No. 1) and incubated with 75 μM DiFMUP (Sigma) as substrate.Briefly, DMSO serially diluted testing compounds were transferred to the bottom of the assay plate. SHP2 was then added together with the IRS1 peptide. 30 min post incubation, the DiFMUP substrate was added to the reaction and incubated 30 min at room temperature. Finally 5 μL of 160 μM bpV (Potassium bisperoxo[1,10-phenanthroline]oxovanadate [V], Sigma) were added to stop and quench the reaction. The fluorescence was detected by a microplate reader (Envision, PerkinElmer) according to the DiFMUP excitation and emission wavelength. The lower the fluorescence the higher the SHP2 inhibition. The activity of each compound dilution was calculated as percentage of inhibition between vehicle (DMSO, 0% inhibition) and no enzyme (100% inhibition). The percentage inhibition is fitted against the compound dilutions with a four-parameter logistic regression.
- Allosteric Inhibition Assay SHP2 is allosterically activated through binding of bis-tyrosyl-phosphorylated peptides to its Src Homology 2 (SH2) domains. The latter activation step leads to the release of the auto-inhibitory interface of SHP2, which in turn renders the SHP2 protein tyrosine phosphatase (PTP) active and available for substrate recognition and reaction catalysis. The catalytic activity of SHP2 was monitored using the surrogate substrate DiFMUP in a prompt fluorescence assay format.More specifically, the phosphatase reactions were performed at room temperature in 384-well black polystyrene plate, flat bottom, low flange, non-binding surface (Corning, Cat #3575) using a final reaction volume of 25 μL and the following assay buffer conditions: 60 mM HEPES, pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA, 0.05% P-20, 5 mM DTT.The inhibition of SHP2 by compounds of the invention (concentrations varying from 0.003-100 μM) was monitored using an assay in which 0.5 nM of SHP2 was incubated with of 0.5 μM of peptide IRS1_pY1172(dPEG8)pY1222 (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide) (SEQ ID NO:1). After 30-60 minutes incubation at 25° C., the surrogate substrate DiFMUP (Invitrogen, cat #D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then quenched by the addition of 5 μl of a 160 μM solution of bpV(Phen) (Enzo Life Sciences cat #ALX-270-204). The fluorescence signal was monitored using a microplate reader (Envision, Perki-Elmer) using excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitor dose response curves were analyzed using normalized IC50 regression curve fitting with control based normalization.
- SHP2 Allosteric Inhibition Assay SHP2 is allosterically activated through binding of bis-tyrosyl-phorphorylated peptides to its Src Homology 2 (SH2) domains. The latter activation step leads to the release of the auto-inhibitory interface of SHP2, which in turn renders the SHP2 protein tyrosine phosphatase (PTP) active and available for substrate recognition and reaction catalysis. The catalytic activity of SHP2 was monitored using the surrogate substrate DiFMUP in a prompt fluorescence assay format.More specifically, the phosphatase reactions were performed at room temperature in 384-well black polystyrene plate, flat bottom, low flange, non-binding surface (Corning, Cat#3575) using a final reaction volume of 25 μL and the following assay buffer conditions: 60 mM HEPES, pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA, 0.05% P-20, 5 mM DTT.The inhibition of SHP2 by compounds of the invention (concentrations varying from 0.003-100 μM) was monitored using an assay in which 0.5 nM of SHP2 was incubated with of 0.5 μM of peptide IRS1_pY1172(dPEG8)pY1222 (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide) (SEQ ID NO: 1). After 30-60 minutes incubation at 25° C., the surrogate substrate DiFMUP (Invitrogen, cat# D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then quenched by the addition of 5 μl of a 160 μM solution of bpV(Phen) (Enzo Life Sciences cat# ALX-270-204). The fluorescence signal was monitored using a microplate reader (Envision, Perki-Elmer) using excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitor dose response curves were analyzed using normalized IC50 regression curve fitting with control based normalization.
- SHP2 Allosteric Inhibition Assay SHP2 is allosterically activated through binding of bis-tyrosyl-phorphorylated peptides to its Src Homology 2 (SH2) domains. The latter activation step leads to the release of the auto-inhibitory interface of SHP2, which in turn renders the SHP2 protein tyrosine phosphatase (PTP) active and available for substrate recognition and reaction catalysis. The catalytic activity of SHP2 was monitored using the surrogate substrate DiFMUP in a prompt fluorescence assay format.More specifically, the phosphatase reactions were performed at room temperature in 384-well black polystyrene plate, flat bottom, low flange, non-binding surface (Corning, Cat#3575) using a final reaction volume of 25 μL and the following assay buffer conditions: 60 mM HEPES, pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA, 0.05% P-20, 5 mM DTT.The inhibition of SHP2 by compounds of the invention (concentrations varying from 0.003-100 μM) was monitored using an assay in which 0.5 nM of SHP2 was incubated with of 0.5 μM of peptide IRS1_pY1172(dPEG8)pY1222 (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide) (SEQ ID NO:1). After 30-60 minutes incubation at 25° C., the surrogate substrate DiFMUP (Invitrogen, cat# D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then quenched by the addition of 5 μl of a 160 μM solution of bpV(Phen) (Enzo Life Sciences cat# ALX-270-204). The fluorescence signal was monitored using a microplate reader (Envision, Perki-Elmer) using excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitor dose response curves were analyzed using normalized IC50 regression curve fitting with control based normalization.
- SHP2 Allosteric Inhibition Assay SHP2 is allosterically activated through binding of bis-tyrosyl-phorphorylated peptides to its Src Homology 2 (SH2) domains. The latter activation step leads to the release of the auto-inhibitory interface of SHP2, which in turn renders the SHP2 protein tyrosine phosphatase (PTP) active and available for substrate recognition and reaction catalysis. The catalytic activity of SHP2 was monitored using the surrogate substrate DiFMUP in a prompt fluorescence assay format.More specifically, the phosphatase reactions were performed at room temperature in 384-well black polystyrene plate, flat bottom, low flange, non-binding surface (Corning, Cat#3575) using a final reaction volume of 25 μL and the following assay buffer conditions: 60 mM HEPES, pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA, 0.05% P-20, 5 mM DTT.The inhibition of SHP2 by compounds of the invention (concentrations varying from 0.003-100 μM) was monitored using an assay in which 0.5 nM of SHP2 was incubated with of 0.5 μM of peptide IRS1_pY1172(dPEG8)pY1222 (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide) (SEQ ID NO:1). After 30-60 minutes incubation at 25° C., the surrogate substrate DiFMUP (Invitrogen, cat#D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then quenched by the addition of 5 μl of a 160 μM solution of bpV(Phen) (Enzo Life Sciences cat#ALX-270-204). The fluorescence signal was monitored using a microplate reader (Envision, Perki-Elmer) using excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitor dose response curves were analyzed using normalized IC50 regression curve fitting with control based normalization.
- SHP2 Allosteric Inhibition Assay SHP2 is allosterically activated through binding of bis-tyrosyl-phosphorylated peptides to its Src Homology 2 (SH2) domains. The latter activation step leads to the release of the auto-inhibitory interface of SHP2, which in turn renders the SHP2 protein tyrosine phosphatase (PTP) active and available for substrate recognition and reaction catalysis. The catalytic activity of SHP2 was monitored using the surrogate substrate DiFMUP in a prompt fluorescence assay format.More specifically, the phosphatase reactions were performed at room temperature in 384-well black polystyrene plate, flat bottom, low flange, non-binding surface (Corning, Cat#3575) using a final reaction volume of 25 μL and the following assay buffer conditions: 60 mM HEPES, pH 7.2, 75 mM NaCl, 75 mM KCl, 1 mM EDTA, 0.05% P-20, 5 mM DTT.The inhibition of SHP2 by compounds of the invention (concentrations varying from 0.003-100 μM) was monitored using an assay in which 0.5 nM of SHP2 was incubated with of 0.5 μM of peptide IRS1_pY1172(dPEG8)pY1222 (sequence: H2N-LN(pY)IDLDLV(dPEG8)LST(pY)ASINFQK-amide) (SEQ ID NO:1). After 30-60 minutes incubation at 25° C., the surrogate substrate DiFMUP (Invitrogen, cat# D6567) was added to the reaction and incubated at 25° C. for 30 minutes. The reaction was then carefully diluted by the addition of 5 μL of a 160 μM solution of bpV(Phen) (Enzo Life Sciences cat# ALX-270-204). The fluorescence signal was monitored using a microplate reader (Envision, Perki-Elmer) using excitation and emission wavelengths of 340 nm and 450 nm, respectively. The inhibitor dose response curves were analyzed using normalized IC50 regression curve fitting with control based normalization.